Navigating the complexities of firearm maintenance can be a daunting task for the uninitiated. Among the various components that require attention, the floor plate plays a crucial role in the functionality of a magazine. Hexmag, known for its innovative magazine designs, presents a unique challenge when it comes to removing the floor plate. Unlike traditional magazines, Hexmag’s proprietary floor plate design necessitates a specific approach to ensure safe and effective removal.
To embark on this endeavor, gather the necessary tools, including a flathead screwdriver and a pair of needle-nose pliers. Begin by grasping the floor plate firmly with the needle-nose pliers, applying gentle pressure to avoid damaging the delicate components. Simultaneously, insert the flathead screwdriver into the notch located at the bottom of the floor plate. With careful precision, apply downward pressure while simultaneously pulling upward on the floor plate using the pliers. This combined action will gradually disengage the floor plate from its locking mechanism, allowing for its removal.
Once the floor plate is successfully removed, proceed with the subsequent maintenance tasks, such as cleaning or replacing the magazine spring. Upon completion, reassemble the magazine by aligning the floor plate with its designated slot and applying firm pressure until it securely locks into place. Remember to handle all components with care to prevent any accidental damage or malfunctions. By following these detailed instructions, you can confidently remove the Hexmag floor plate, ensuring the continued reliability of your magazine.
Identifying the Floor Plate
The floor plate is the removable component of your Hexmag magazine that clips into the bottom of the body. It holds the spring and follower assembly in place, and it also provides a surface for the baseplate to attach to.
To identify the floor plate on your Hexmag magazine, look for a rectangular piece of plastic or metal at the bottom of the body. The floor plate will usually have a small notch or slot on one side, which is used to insert a tool to remove it.
The floor plate may also have a number or other markings etched into it. These markings can indicate the magazine’s capacity, caliber, or other features.
| Material | Size | Color |
|---|---|---|
| Polymer | 5.56 NATO | Black |
| Metal | 7.62x39mm | FDE |
Sliding the Floor Plate Forward
The Hexmag floor plate is designed to be easily removable for cleaning and maintenance. To slide the floor plate forward, follow these detailed steps:
-
Locate the Floor Plate Release Lever
On the bottom of the magazine, identify the floor plate release lever. It is typically located near the base of the magazine and has a small rectangular button or lever.
-
Depress the Release Lever
With your thumb or index finger, apply firm pressure to the floor plate release lever and push it down. Hold the lever down.
-
Slide the Floor Plate Forward
While holding the release lever down, grasp the floor plate with your other hand and slide it forward towards the muzzle of the magazine. The floor plate should slide smoothly off the magazine body.
Tip If the floor plate is stuck and does not slide easily, you can gently tap the base of the magazine on a hard surface while holding the release lever down. This may help to dislodge any debris or obstructions that are preventing the floor plate from moving.
Removing the Floor Plate
Removing the floor plate from a Hexmag magazine is a simple process that can be completed in just a few minutes. Here’s how to do it:
1. Unload the Magazine
Before you begin, make sure that the magazine is unloaded and the chamber is clear. This will help prevent any accidental discharges.
2. Push Down on the Floor Plate Lock
Locate the floor plate lock on the bottom of the magazine. It is a small, rectangular button that is typically located near the center of the magazine. Press down on the lock with your thumb or a small screwdriver.
3. Slide the Floor Plate Off
Once the floor plate lock is depressed, you should be able to slide the floor plate off of the magazine. If it is stuck, you can gently pry it off with a small screwdriver.
4. Remove the Spring and Follower
Once the floor plate is removed, you will see the spring and follower inside the magazine. The spring is what pushes the rounds up into the chamber, and the follower is what keeps the rounds in place. To remove the spring and follower, simply grasp them and pull them out of the magazine.
| Spring | Follower |
|---|---|
| The spring is a coil of metal that provides tension to push the rounds up into the chamber. | The follower is a small, plastic part that keeps the rounds in place in the magazine. |
Engaging the Floor Plate Release
The Hexmag floor plate release is designed to be easily engaged and released, allowing for quick magazine disassembly and cleaning. Follow these steps to engage the floor plate release:
1. Grip the Magazine
Hold the magazine firmly in one hand, with your thumb resting on the floor plate.
2. Locate the Release Button
On the bottom of the floor plate, you will find a small, square-shaped release button.
3. Push Down on the Button
Press down on the release button firmly with your thumb. You will feel a slight click as the button engages.
4. Slide the Floor Plate Forward
While holding the release button down, slide the floor plate forward until it is fully released from the magazine body.
5. Inspect the Floor Plate
Once the floor plate is removed, inspect it for any damage or debris. If necessary, clean the floor plate with a soft cloth.
6. Reinstall the Floor Plate
To reinstall the floor plate, simply align it with the magazine body and slide it back into place. Ensure that the floor plate is fully seated and engaged.
7. Release the Release Button
Once the floor plate is reinstalled, release the release button. The floor plate should now be securely locked in place.
8. Check the Release Mechanism
After reassembling the magazine, check the floor plate release mechanism by pressing down on the release button. The floor plate should slide forward smoothly and easily. If the floor plate does not release, repeat the engagement process.
Lubricating the Floor Plate
Applying lubrication to the floor plate helps it slide smoothly during insertion and removal, reducing wear and tear. Consider using a lubricant specifically designed for firearms, such as a silicone-based oil or grease.
Step-by-Step Instructions:
- Disassemble the Magazine: Pull down on the base plate and remove the spring and follower.
- Locate the Floor Plate: The floor plate is the metal piece at the bottom of the magazine body.
- Apply Lubricant: Apply a small amount of lubricant to the contact points between the floor plate and the magazine body.
- Lubricate the Edges: Focus on lubricating the edges of the floor plate that slide against the magazine body.
- Avoid Over Lubrication: Use only a small amount of lubricant to prevent excess buildup.
- Work the Floor Plate: Insert and remove the floor plate several times to distribute the lubricant.
- Wipe Off Excess: Use a clean cloth or paper towel to wipe off any excess lubricant.
- Test the Fit: Reassemble the magazine and check if the floor plate slides smoothly without binding.
- Consider a Dry Lubricant: In cold weather or dusty environments, a dry lubricant like graphite powder can be more effective.
- Lubrication Frequency: Lubricate the floor plate every few months or after prolonged use to maintain its smooth operation.
How To Remove Hexmag Floor Plate
To remove the Hexmag floor plate, first ensure that the magazine is unloaded and the firearm is clear. Then, locate the floor plate release button on the bottom of the magazine. It is typically a small, circular button located near the front of the magazine. Press and hold the floor plate release button while sliding the floor plate down and off the magazine body. Once the floor plate is removed, you can access the magazine’s internal components for cleaning or maintenance.
People also ask
How do I disassemble a Hexmag magazine?
To disassemble a Hexmag magazine, you will need to remove the floor plate, spring, and follower. To remove the floor plate, press and hold the floor plate release button while sliding the floor plate down and off the magazine body. To remove the spring and follower, simply grasp the follower and pull it straight up and out of the magazine body.
How do I clean a Hexmag magazine?
To clean a Hexmag magazine, you will need to disassemble it as described above. Once the magazine is disassembled, you can use a soft cloth or brush to remove any dirt or debris. You can also use a mild soap and water solution to clean the magazine’s internal components. Once the magazine is clean, reassemble it in reverse order.
How do I fix a Hexmag magazine that is not feeding properly?
If your Hexmag magazine is not feeding properly, it could be due to a number of issues. First, check to make sure that the magazine is properly seated in the firearm. If the magazine is not seated properly, it can cause feeding problems. You can also try cleaning the magazine as described above. If the magazine is still not feeding properly, you may need to replace the spring or follower.
