Disassembling the Purifair 2021.05 air purifier is a simple task that can be completed in just a few minutes. By following these simple steps, you can ensure that your air purifier is properly maintained and functioning correctly. Before you begin, gather the necessary tools and materials, including a Phillips head screwdriver, a flat head screwdriver, and a pair of pliers. Additionally, it is helpful to have a clean, well-lit workspace.
First, remove the front panel of the air purifier by unscrewing the two screws located at the top of the panel. Once the screws are removed, carefully lift the panel off of the unit. Next, remove the two screws located at the bottom of the air purifier that secure the back panel. Once the screws are removed, carefully lift the back panel off of the unit. Finally, remove the two screws located on the side of the air purifier that secure the filter cover. Once the screws are removed, carefully lift the filter cover off of the unit.
Now that the Purifair 2021.05 air purifier is disassembled, you can clean the components and replace the filter. To clean the components, use a soft cloth dampened with a mild detergent solution. Wipe down all of the surfaces of the components, including the fan blades, the filter, and the housing. Once the components are clean, allow them to dry completely before reassembling the air purifier. To replace the filter, simply insert the new filter into the filter compartment and secure it in place with the filter cover. Once the filter is replaced, reassemble the air purifier in the reverse order of disassembly.
Safety Precautions
Before You Start
Before disassembling the Purifair 2021.05, it’s essential to take the following safety precautions:
*
Power Down and Unplug
Ensure that the unit is turned off and disconnected from any power source. This will prevent the risk of electrical shock while working on the device.
*
Wear Protective Gear
To protect your eyes and hands, consider wearing safety glasses and gloves. This will minimize the risk of debris or sharp edges causing injury.
*
Ventilate the Area
When disassembling the air purifier, work in a well-ventilated area to avoid inhaling any dust or particles that may release during the process.
*
Use the Correct Tools
Make sure you have the appropriate tools for the disassembly task, such as screwdrivers or a wrench. Using the right tools will help prevent damage to the components or yourself.
*
Avoid Touching Internal Components
Once the unit is open, avoid touching any internal components, as they may contain electrical charges or be delicate.
*
Handle Filters with Care
When removing or replacing filters, handle them gently to avoid damaging their delicate structure.
*
Keep Parts Organized
As you disassemble the unit, keep all screws, bolts, and components organized in a designated area to avoid losing or misplacing them during reassembly.
*
Thoroughly Clean After Disassembly
Once the unit is disassembled, take the opportunity to thoroughly clean all components with a damp cloth or a vacuum cleaner to remove dust and debris.
*
Reassemble Carefully
When reassembling the unit, ensure that all components are properly aligned and secured to prevent any operational issues.
*
Test the Unit
After reassembly, plug the unit back in and power it on to ensure it’s functioning correctly. If you encounter any issues, refer to the user manual or consult with a qualified technician.
Disassembling the HEPA Filter
To begin disassembling the HEPA filter, you will need to locate the four screws that secure the filter cover. These screws are typically located on the sides of the filter, and they can be removed using a screwdriver.
Once the screws have been removed, you can carefully lift the filter cover off the filter. Be careful not to damage the filter when you do this.
Next, you will need to remove the HEPA filter from the housing. To do this, gently lift the filter up and out of the housing. Be careful not to touch the filter material with your hands, as this can damage the filter.
Once the HEPA filter has been removed from the housing, you can clean the filter according to the manufacturer’s instructions. Refer to the manufacturer’s guide in case you need to replace the filter.
| Step | Description |
|---|---|
| 1 | Locate the four screws that secure the filter cover. |
| 2 | Remove the screws using a screwdriver. |
| 3 | Carefully lift the filter cover off the filter. |
| 4 | Gently lift the HEPA filter up and out of the housing. |
| 5 | Clean the filter according to the manufacturer’s instructions. In case of replacement, refer to the manufacturer’s guide for further steps. |
Separating the Ionizer
To separate the ionizer from the Purifair 2021.05, follow these steps:
-
Locate the ionizer. It is a small, black cylindrical device located on the back of the unit.
-
Disconnect the power cord from the ionizer.
-
Remove the screws that hold the ionizer in place.
-
Gently pull the ionizer towards you to detach it from the unit.
-
Disconnect the electrical harness connector from the ionizer.
-
Remove the ionizer filter by pulling it out of the ionizer housing.
-
Clean the ionizer filter according to the manufacturer’s instructions. To thoroughly clean the filter, follow these detailed steps:
a. Remove the mesh strainer from the ionizer housing.
b. Rinse the mesh strainer with warm water.
c. Use a soft brush to remove any debris from the mesh strainer.
d. Rinse the ionizer filter with warm water.
e. Use a soft sponge to remove any debris from the ionizer filter.
f. Dry the mesh strainer and ionizer filter completely before reassembling the ionizer.
How To Disassemble The Purifair 2021.05
To disassemble the Purifair 2021.05, follow these steps:
- Unplug the Purifair from the power outlet.
- Remove the front cover by pressing the release button on the bottom of the unit and pulling the cover forward.
- Remove the pre-filter by pulling it straight out of the unit.
- Remove the HEPA filter by pulling it straight out of the unit.
- Remove the activated carbon filter by pulling it straight out of the unit.
- Remove the rear cover by pressing the release buttons on the sides of the unit and pulling the cover back.
- Remove the fan by unscrewing the screws that hold it in place.
- Remove the motor by unscrewing the screws that hold it in place.
People Also Ask About How To Disassemble The Purifair 2021.05
What tools do I need to disassemble the Purifair 2021.05?
You will need a screwdriver to remove the screws that hold the fan and motor in place.
How often should I disassemble the Purifair 2021.05?
You should disassemble the Purifair 2021.05 every 6 months to clean the filters and other components.
Can I disassemble the Purifair 2021.05 myself?
Yes, you can disassemble the Purifair 2021.05 yourself by following the steps in this guide.
