5 Easy Steps to Jumpstart Your Car with Noco Boost Plus ⋆ binaryage.com

If you’re a car enthusiast, you know the frustration of a dead battery. It can happen at the most inconvenient times, leaving you stranded and helpless. But what if there was a way to jump-start your car without having to rely on another vehicle or roadside assistance? The NOCO Boost Plus is a portable jump starter that can give your car the boost it needs to get going again. It’s small, lightweight, and easy to use, making it a must-have for any driver.

The NOCO Boost Plus is incredibly simple to use. First, connect the clamps to your car’s battery terminals. Make sure the positive clamp is connected to the positive terminal and the negative clamp is connected to the negative terminal. Then, turn on the NOCO Boost Plus and press the “Boost” button. The jump starter will automatically start charging your battery. Once your battery has enough charge, you can start your car.

The NOCO Boost Plus is a versatile device that can be used for more than just jump-starting cars. It can also be used to charge other devices, such as smartphones, tablets, and laptops. It’s also a great way to power small appliances, such as lights, fans, and radios. With its compact size and long battery life, the NOCO Boost Plus is a must-have for any car owner or outdoor enthusiast.

Connecting the Jumper Cables

Follow these detailed steps to ensure a safe and effective connection of jumper cables from the NOCO Boost Plus to a dead battery:

1. Prepare the Vehicles

Before connecting cables, ensure both vehicles are parked in close proximity, with their engines turned off and parking brakes engaged. Place the vehicles in neutral (for manual transmission) or park (for automatic transmission).

Action	Purpose
Park vehicles close	Ensure cable reach
Turn off engines	Prevent electrical damage
Engage parking brakes	Secure vehicles
Shift to neutral/park	Allow vehicle movement if needed

2. Identify the Terminals

Locate the positive (+) and negative (-) battery terminals on both vehicles. These terminals are usually marked with red or black coloring, respectively. Ensure the terminals are clean and free of corrosion.

Terminal	Color	Connection
Positive (+)	Red	NOCO Boost Plus red cable
Negative (-)	Black	NOCO Boost Plus black cable

3. Connect the Cables

Connect the red cable from the NOCO Boost Plus to the positive terminal of the dead battery. Then, connect the other end of the red cable to the positive terminal of the working battery. Do not connect the red and black cables together.

Next, connect the black cable from the NOCO Boost Plus to the negative terminal of the working battery. Finally, connect the other end of the black cable to a metal component on the frame of the vehicle with the dead battery. This ensures a good ground connection.

Starting a Dead Battery

Safety Precautions

Park the vehicles facing each other, keeping a safe distance of at least 18 inches.
Turn off the engines of both vehicles.
Engage the parking brakes to prevent movement.
Ensure the vehicles are not touching each other.
Wear gloves and safety glasses to protect yourself from electrical sparks.

Procedure

Connect the Jumper Cables:
- Connect the red (positive) clamp of the jumper cables to the positive (+) terminal of the dead battery.
- Connect the other end of the red clamp to the positive (+) terminal of the good battery.
- Connect the black (negative) clamp of the jumper cables to the negative (-) terminal of the good battery.
- Connect the other end of the black clamp to an unpainted metal surface on the frame of the vehicle with the dead battery, away from the battery.
Start the Vehicle with the Good Battery:
- With the jumper cables connected, start the vehicle with the good battery.
- Let the engine run for a few minutes to charge the dead battery.
Remove the Jumper Cables:
- Once the dead battery is partially charged, remove the jumper cables in reverse order:
  - Disconnect the black clamp from the vehicle with the dead battery.
  - Disconnect the black clamp from the good battery.
  - Disconnect the red clamp from the good battery.
  - Disconnect the red clamp from the dead battery.
Start the Vehicle with the Dead Battery:
- Attempt to start the vehicle with the dead battery.
- If the vehicle starts, let it run for a while to fully recharge the battery.

Safety Tip	Explanation
Wear gloves and safety glasses	Protects against electrical sparks and debris
Keep vehicles apart	Prevents accidental contact and sparks
Connect to metal surface	Avoids creating a spark near the battery

Using the Safety Features

The NOCO Boost Plus features a comprehensive suite of safety mechanisms to ensure user and device protection during operation. These safeguards include:

Over-Current Protection

The NOCO Boost Plus is equipped with an advanced over-current protection system that detects excessive current flow and automatically shuts off the device to prevent damage to both the battery and the device being jump-started.

Reverse Polarity Protection

The NOCO Boost Plus employs a polarity protection feature that prevents incorrect connections to the vehicle’s battery terminals. This safeguard ensures that the device is connected properly, reducing the risk of electrical damage and potential injuries.

Over-Discharge Protection

To protect the NOCO Boost Plus itself, an over-discharge protection system monitors the device’s battery level and automatically shuts it off when the battery is low, ensuring that it remains charged and ready for use when needed.

Short-Circuit Protection

The NOCO Boost Plus features a short-circuit protection mechanism that detects and disengages the connection if a short circuit is identified. This safeguard minimizes the risk of electrical damage to both the device and the vehicle’s electrical system.

Temperature Protection

The NOCO Boost Plus is designed to operate within a specific temperature range. If the device overheats or falls below the recommended operating temperature, it will automatically shut off to prevent damage to its internal components.

Troubleshooting Common Issues

1. The Noco Boost Plus is not powering on

Ensure that the device is fully charged. If it is, check the power button to make sure it is functioning properly. If the power button is not working, contact Noco customer support for assistance.

2. The Noco Boost Plus is not charging my device

Verify that the charging cable is securely connected to both the Noco Boost Plus and your device. Ensure that the cable is not damaged. If the cable is not damaged, try using a different charging cable.

3. The Noco Boost Plus is not jump-starting my vehicle

Check that the jumper cables are securely connected to both the Noco Boost Plus and your vehicle’s battery terminals. Ensure that the terminals are clean and free of corrosion. If the terminals are clean and the cables are securely connected, try jump-starting the vehicle again.

4. The Noco Boost Plus is displaying an error message

The Noco Boost Plus may display various error messages, each indicating a specific issue. Refer to the table below for a list of common error messages and their corresponding solutions:

Error Message	Solution
“Battery Low”	Charge the Noco Boost Plus.
“Output Overload”	Disconnect the device from the Noco Boost Plus and try again.
“Temperature Fault”	Allow the Noco Boost Plus to cool down or warm up before using.
“Device Not Supported”	The connected device is not compatible with the Noco Boost Plus.

If the error message you are experiencing is not listed in the table, contact Noco customer support for assistance.

Charging the Noco Boost Plus

Before using the Noco Boost Plus, it’s essential to ensure it’s fully charged. Here’s a step-by-step guide to help you charge your device:

1. Connect the Charger

Plug the AC charger into a standard wall outlet and connect the other end to the charging port on the Noco Boost Plus.

2. Check the Charging Indicator

The battery indicator on the device will illuminate to indicate that the charging process has begun.

3. Charge Time

The charging time varies depending on the battery level. Typically, it takes around 2-3 hours to fully charge an empty Noco Boost Plus.

4. Disconnect the Charger

Once the battery indicator shows a full charge, disconnect the AC charger from both the outlet and the Noco Boost Plus.

5. Battery Capacity

The Noco Boost Plus features a high-capacity battery that can provide multiple jump-starts on a single charge. The following table provides an approximate number of jump-starts you can expect based on the battery capacity:

Battery Capacity	Approximate Number of Jump-Starts
2000mAh	10-15
6000mAh	25-30
12000mAh	50-60

Maintaining the Battery

To get the most out of your Noco Boost Plus battery, it’s essential to maintain it properly. Here are six important steps you should follow:

1. Keep it Charged

Ensure the battery is fully charged before storing it. A fully charged battery will maintain its capacity for up to 12 months.

2. Store in a Cool, Dry Place

Store the battery in a cool, dry environment away from direct sunlight and heat. Extreme temperatures can damage the battery cells.

3. Avoid Deep Discharge

Never allow the battery to completely discharge. If the battery is discharged below 20%, recharge it as soon as possible.

4. Use Regularly

Regularly using the battery helps maintain its health. If the battery is not used for extended periods, it may lose its capacity.

5. Clean the Terminals

Keep the battery terminals clean and free of corrosion. Corrosion can reduce the battery’s ability to conduct electricity.

6. Monitor the Battery’s Condition

Regularly check the battery’s voltage using a voltmeter. A battery’s voltage should be around 12.6 volts when fully charged. If the voltage drops below 12 volts, the battery may need to be replaced.

Voltage	Battery Condition
12.6 volts	Fully charged
12.4 volts	75% charged
12.2 volts	50% charged
12.0 volts	25% charged
Below 12 volts	Needs replacement

Storing the Noco Boost Plus

To ensure the longevity and optimal performance of your Noco Boost Plus, proper storage is crucial. Follow these guidelines for effective storage:

1. Charge the Unit Regularly

Store the Noco Boost Plus with a full charge. This prevents self-discharge and keeps the battery in peak condition.

2. Avoid Extreme Temperatures

Avoid storing the unit in areas with extreme heat or cold. Optimal temperature range for storage is between 32°F (0°C) and 113°F (45°C).

3. Protect from Moisture

Store the Noco Boost Plus in a dry and non-humid environment to prevent corrosion and electrical damage.

4. Keep Away from Sunlight

Direct sunlight can damage the unit’s components. Avoid exposure to sunlight during storage.

5. Avoid Physical Damage

Store the unit in a secure location where it will not be subject to physical shocks, impacts, or falls.

6. Disconnect Accessories

Remove any connected cables or accessories from the Noco Boost Plus before storing.

7. Storage Recommendations

For optimal storage conditions, consider the following:

Storage Duration	Recommended Charge Interval
Up to 3 months	No charging required
3-6 months	Charge every 3-4 months
6-12 months	Charge every 2-3 months
Over 12 months	Charge every 1-2 months

Precautions and Safety Measures

1. Keep Away from Children

The Noco Boost Plus is not a toy and should be kept out of reach of children. The high voltage and electrical current it carries can cause serious injury or death if not handled properly.

2. Wear Safety Gear

When using the Noco Boost Plus, wear safety glasses and gloves to protect yourself from sparks and electrical shocks.

3. Connect Properly

Make sure the positive (+) terminal of the Noco Boost Plus is connected to the positive (+) terminal of the dead battery, and the negative (-) terminal of the Noco Boost Plus is connected to a good ground, such as the engine block. Reversing the connections can damage the battery or the Noco Boost Plus.

4. Avoid Sparks

Do not allow the positive and negative terminals of the Noco Boost Plus to touch each other, as this can create a spark and ignite flammable materials. Also, avoid touching the terminals with any metal objects.

5. Charge Before First Use

Before using the Noco Boost Plus for the first time, charge it fully using the included USB-C cable. This will ensure that it has enough power to jump-start your vehicle.

6. Check Charge Regularly

Check the charge level of the Noco Boost Plus regularly, especially before attempting to jump-start a vehicle. If the charge level is low, recharge the Noco Boost Plus before use.

7. Store Properly

When not in use, store the Noco Boost Plus in a cool, dry place away from direct sunlight. Do not expose it to extreme temperatures or moisture.

8. Troubleshooting

If you encounter any problems with the Noco Boost Plus, refer to the user manual for troubleshooting tips. If the problem persists, contact NOCO Customer Support.

Problem	Possible Cause	Solution
No power	Dead battery	Charge the Noco Boost Plus before use.
Low power	Insufficient charge	Charge the Noco Boost Plus fully before use.
Sparks	Incorrect connections	Check and correct the connections.
No jump-start	Weak battery	Try multiple jump-starts.

Using the LED Indicator Lights

The Noco Boost Plus features a series of LED indicator lights that provide valuable information about the battery’s status. Understanding these lights is crucial for effective usage:

Battery Level Indicator

The five blue LED lights on the front of the device indicate the battery’s charge level. Each light represents 20% of the battery’s capacity.

When the device is fully charged, all five lights will be illuminated. As the battery discharges, the lights will turn off one by one.

Number of Blue Lights	Battery Level
5	100%
4	80%
3	60%
2	40%
1	20%
0	0%

Battery Health Indicator

The green LED light on the device’s side indicates the battery’s health. Here are the different scenarios it may represent:

Solid Green: Battery is healthy.
Flashing Green: Battery needs to be charged.
Red Flashing: Battery is severely depleted or damaged.

Power Indicator

The red LED light next to the power button indicates that the device is powered on. When the button is pressed, this light will illuminate.

Emergency Power Source

Noco Boost Plus provides a safe and reliable emergency power source, making it an essential tool for unexpected situations. Whether you’re facing a dead battery or simply need a backup power supply, the Noco Boost Plus has got you covered.

How To Use Noco Boost Plus

Using the Noco Boost Plus is incredibly easy, even for those with no technical experience. Here’s a step-by-step guide to guide you through the process:

1. Prepare the Unit

Ensure the Noco Boost Plus is fully charged before use. Connect the supplied charging cable to a power outlet and plug it into the charger port on the unit.

2. Position the Clamps

Identify the positive (+) and negative (-) terminals on your vehicle’s battery. Connect the red clamp to the positive terminal and the black clamp to the negative terminal.

3. Start the Vehicle

Press the power button on the Noco Boost Plus to initiate the jump-starting process. Wait until the green light lights up to indicate a successful connection.

4. Disconnect the Clamps

Once the vehicle has started, turn off the Noco Boost Plus and disconnect the clamps in the reverse order of which they were attached.

5. Charge the Unit

After use, recharge the Noco Boost Plus using the supplied charging cable. Connect the cable to the charger port on the unit and plug it into a power outlet.

6. Store Properly

Store the Noco Boost Plus in a dry, temperature-controlled environment when not in use. Protect it from extreme heat or cold to ensure its longevity.

7. Safety Precautions

Always follow the safety guidelines provided in the user manual. Avoid touching the metal parts of the clamps while in use to prevent electric shock.

8. Multiple Uses

In addition to jump-starting vehicles, the Noco Boost Plus can also charge USB devices, power laptops, and even jump-start larger vehicles with its powerful battery.

9. Compatibility

The Noco Boost Plus is compatible with a wide range of vehicles, including cars, trucks, boats, and motorcycles. Its compact size and portability make it easy to carry in any vehicle for emergencies.

10. Extended Features

The Noco Boost Plus offers several advanced features, including:

Feature	Description
UltraSafe technology	Protects against short circuits, overloads, and incorrect connections
External charging port	Allows for charging devices while on the go
LED flashlight	Provides illumination in low-light situations
Built-in digital voltmeter	Measures the battery voltage of both the unit and the vehicle

How to Use Noco Boost Plus

Step 1: Gather your materials. You will need the Noco Boost Plus, the battery terminals, and the user manual.

Step 2: Connect the Noco Boost Plus to the battery terminals. Make sure the positive (+) terminal is connected to the positive terminal on the battery, and the negative (-) terminal is connected to the negative terminal on the battery.

Step 3: Turn on the Noco Boost Plus. The power button is located on the front of the device.

Step 4: Start your vehicle. The Noco Boost Plus will provide power to your vehicle’s battery, allowing it to start.

Step 5: Disconnect the Noco Boost Plus from the battery terminals. Once your vehicle has started, you can disconnect the Noco Boost Plus from the battery terminals.